(067) 38-76-135 >
Mon–Fri 9:00–18:00

0

Cart

No products in the cart.

Category: Tests

  • Practicing evacuation skills using TQ DNIPRO tourniquets
    Featured Video Play Icon

    Practicing evacuation skills using TQ DNIPRO tourniquets

    199th Training Center of the Air Assault Forces. Practicing evacuation skills and providing aid to the wounded in conditions simulating combat, using TQ DNIPRO Gen2 training tourniquets 🟦

    We are glad to contribute to the training process✔️

    TQ DNIPRO tourniquets save lives🛡️

  • Mutual aid “under fire”
    Featured Video Play Icon

    Mutual aid “under fire”

    In terms of priority, this is the next type of battlefield care after self-aid. However, the realities of modern warfare—characterized by the dominance of drones equipped with drop systems and FPV (first-person view) drones—turn both the casualty and the rescuer into a collective target. Instead of occupying trenches, infantry are forced to take shelter in “burrows” (dugouts/holes), keeping only the exit under fire control.

    Under these conditions, anyone wounded outside of a shelter is essentially left to provide aid to themselves. The well-known adage, “the best medicine on the battlefield is fire superiority,” becomes particularly relevant for assault groups. ✔️

    Nevertheless, basic first-aid drills—despite how unrealistic their scenarios might sometimes seem—teach the following:
    1️⃣ The readiness to provide first aid while under fire;
    2️⃣ The casualty’s responsibility to verbally declare that they have been wounded;
    3️⃣ The ability to act either upon a commander’s orders or on one’s own initiative, depending on the circumstances;
    4️⃣ How to minimize the risk of being hit while approaching the casualty and performing the only feasible intervention under fire: applying a tourniquet;
    5️⃣ How to visually identify signs of massive hemorrhage while approaching;
    6️⃣ How to establish contact with the casualty;
    7️⃣ How to conduct a rapid assessment to determine whether a tourniquet is necessary;
    8️⃣ How to apply tourniquets correctly;
    9️⃣ How to evacuate quickly.

    ☝️ Always remember: the skills you have acquired are the only things that will actually work in an extreme situation.

    Special thanks to the 199th Training Center for the video. ✔️

  • Self-aid. “Quick-application tourniquet.” Care under fire.

    Self-aid. “Quick-application tourniquet.” Care under fire.

    “In a critical situation, you will not rise to the level of your expectations; instead, you will fall to the level of your capabilities.” This well-known adage underscores the necessity of constantly practicing your skills—especially self-aid on the battlefield, which is the top priority during the “Care Under Fire” phase.

    Push yourself to physical exhaustion! Only then can you approximate the physical state and the loss of spatial awareness experienced by a wounded person.

    🔸Make the “first pass” tight—pull it hard! Pull as if this is your one and only chance to stop the bleeding and save your life!
    🔸Twist the windlass until it stops, then give it another half-turn!
    This must become a single, fluid motion—one seamless action!

    Train! Don’t let the enemy kill you.

    The video demonstrating tourniquet application is provided by the 199th Training Center.

  • Hemostatic tourniquets in extreme conditions

    Hemostatic tourniquets in extreme conditions

    In an emergency, life can be a matter of seconds, and your equipment needs to work flawlessly. However, extreme conditions, such as extreme cold, heat, or heavy rain, can significantly affect the effectiveness of even the highest quality equipment, including hemostatic tourniquets. Tourniquets are often used in the most difficult circumstances – on the battlefield, in a natural disaster zone, or in emergency medicine. That is why it is important to understand how they react to various environmental factors and what can be done to ensure that their functionality remains stable. In this article, we’ll take a closer look at how tourniquets work in conditions that can push them to their limits.

    Impact of extreme conditions on tourniquet performance

    Extreme conditions pose numerous challenges to the materials and design of tourniquets, which can affect their ability to stop bleeding quickly and effectively. For example, in cold climates, tourniquets can lose their flexibility due to a drop in temperature, making it difficult to apply them correctly. Freezing of mechanisms such as buckles or screws can render them inoperable at a critical moment. Heat, on the other hand, contributes to the accelerated wear of materials, especially synthetic fabrics, and can weaken connecting elements. Humidity and contaminants, such as dirt or sand, can block the tightening mechanisms, reducing the effectiveness of the hemostatic barrier or even disabling it completely. These issues need to be taken into account both when selecting a tourniquet and when using it in the field. Thorough testing and training can significantly reduce the risks.

    Peculiarities of using tourniquets in different climatic conditions

    The variety of climatic conditions creates specific challenges for the use of tourniquets. Each situation requires taking into account different factors that affect the materials, mechanisms, and performance of the equipment.

    Cold climate

    At low temperatures, tourniquet materials often lose their elasticity. This applies to both synthetic fabrics and plastic components, which can become brittle. In such conditions, the application of the tourniquet becomes more difficult, as the stiffness of the materials makes the process less accurate and requires more effort. The frozen hands of both the victim and the person providing assistance can become an additional obstacle. To avoid these problems, it is important to choose tourniquets made of frost-resistant materials and to train with gloves on. By the way, we have conducted tests on the stress resistance of tourniquets to cold climates. Learn more in the video.

    High temperatures

    In hot climates, the tourniquet materials are subject to thermal wear. Constant exposure to high temperatures can cause fabrics to delaminate and fasteners to loosen. Tourniquets made of lower-quality materials often lose their strength and durability, which increases the risk of failure at a critical moment. For such conditions, it is necessary to choose products with heat-resistant properties and regularly check their condition.

    Humid environments

    High humidity, frequent rains or exposure to water can negatively affect the efficiency of tourniquets. Water penetrates the fabrics, increasing the risk of stretching, and metal components can rust. Dirt and sand that gets into the mechanisms can also block their operation or act as a damaging abrasive. If the tourniquets are intended for use in wet conditions, they should be equipped with water-repellent coatings and simple mechanisms that can be easily cleaned of dirt.

    Difficult conditions on the battlefield

    The battlefield is a combination of various extreme conditions: high and low temperatures, high humidity, pollution and mechanical damage. The tourniquet must demonstrate maximum versatility and reliability in such conditions. Soldiers should thoroughly test the equipment before using it, making sure it can withstand any tests. Additionally, it should be borne in mind that tourniquets that have not been certified for combat conditions may not be effective.

    Recommendations for preparing hemostatic tourniquets for extreme conditions

    First of all, you should pay attention to tourniquets that have been certified for use in extreme conditions. They must be made of durable materials that are resistant to temperature extremes, moisture, and mechanical damage. It is important to check the manufacturer’s recommendations and feedback from users who have used the tourniquets in difficult conditions. The skills of quick and correct application of a tourniquet are also critical. Training should take into account the specifics of the climate: for example, applying with gloves, in a humid environment or with limited visibility. Regular practice will help you act confidently even in stressful situations.

    Tourniquets should be stored in places that are protected from excessive humidity, extreme temperatures and direct sunlight. It is recommended to use waterproof bags or special covers for transportation. In difficult conditions, one tourniquet may not be sufficient, so it is recommended to have additional pieces of equipment, especially if you are expected to stay in the risk zone for a long time. Before each use, check the mechanisms for serviceability, integrity of materials, and absence of damage. If any defects are found, the tourniquet should be replaced. Following these recommendations will significantly increase the efficiency of tourniquets in extreme conditions and help save lives in critical situations.

    Preparedness for any challenges

    Awareness of the importance of quality equipment and proper training are key to the successful use of tourniquets in difficult conditions. Among the modern solutions, we offer the TQ Dnipro Gen 2 model, which is designed to withstand the toughest operating conditions. Thanks to the use of high-quality materials and proven mechanisms, this tourniquet ensures reliability even in the most difficult climatic situations.

  • Tourniquets are not afraid of mud

    Tourniquets are not afraid of mud

    When people ask us what a hemostatic tourniquet is, we answer that it is a high-tech device that saves lives. To create it, we need more than just certain structural elements. We use sophisticated technologies, conduct technical calculations, practical research with volunteers, and tests in the extreme conditions of modern warfare. We strive for an efficient and predictable tourniquet that can operate in the most difficult conditions, even those similar to those that occurred, for example, near Bakhmut. Therefore, when you choose a hemostatic tourniquet from DNIPRO, you can be sure that you are choosing life and safety.

    (more…)
  • Testing the Dnipro turnstiles in the cold

    Testing the Dnipro turnstiles in the cold

    What is a testing laboratory for a hemostatic tourniquet manufacturer? It is a place where technical tests are carried out and weaknesses are found in the complex processes of creating a tourniquet. Our laboratory is the key to understanding how to ensure efficient and reliable operation of the tourniquet in the most extreme conditions. We monitor every stage of the hemostatic tourniquet creation to find and correct any shortcomings and ensure the highest quality of the product. Thus, we guarantee that our tourniquet will work reliably and efficiently to save lives.

    Усі види випробувань

    All kinds of tests

    Our tool may seem perfect, but perfection requires constant maintenance. We carry out tests in various conditions to identify possible weaknesses in advance and prevent failure. This also allows us to reduce the influence of the human factor in the face of stress that may arise from the use of our tool on the battlefield or in the civilian sphere. We carry out all kinds of tests to ensure the highest quality and reliability of our tools.

    1. Absence of destructive changes in the polyamide pad under the gate.
    2. The ability to hold the tourniquet gate with a clip or horns after 4 half-turns with a working load.
    3. Tourniquet ring disengagement and coupling.
    4. The level of deformation of the tape tip, which may affect the ability to thread a metal buckle into the gap.
    5. The level of loss of the achieved pressure value for two hours of exposure on the stand.
    6. Structural changes in the tourniquet elements under prolonged exposure to low temperatures, as well as changes in the behavior of the tool during application are possible.
    7. Our ongoing testing ensures the highest quality of the tool and confidence in its reliability.
PRODUCT CATALOG BECOME A PARTNER
SELECTED
DOWNLOAD CATALOGUE Information
Contacts
Store address
Dnipro city
Phone
0800 35 36 28
Schedule
Mon–Fri 09:00–18:00